Wählen Sie ein anderes Land oder eine andere Region aus, um Inhalte für Ihren Standort anzuzeigen.
Vereinigte Staaten von Amerika
04:04:48 GMT+0000 (Coordinated Universal Time)
MLF32-155-ZR-W2-FBALG
Linearmodul
Module mit außenliegender Laufrollenführung und Zahnriemenantrieb.Mit zweitem, angetriebenen Laufwagen und Faltenbalg
Produktinformationen
Hauptabmessungen und Leistungsdaten
| B1 | 86 mm | Total Width |
| H | 82 mm | Height |
| L | 155 mm | Length |
Anschlussmaße
| D86 | 70 mm | |
| D87 | 80 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 61 mm | Ø Inner Fit |
| L88 | 25 mm | |
| G43 | M8 | Thread |
| G87 | M6 | Thread |
| h85 | 41,5 mm | |
| JB43 | 59 mm | |
| JL43 | 100 mm | Tolerance ±0,2 |
| jB8 | 43 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 16 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| T86 | 2,3 mm | Einpasstiefe |
| Tol T86 up | 0,3 mm | Obere Toleranz |
| Tol T86 low | 0 mm | Untere Toleranz |
| t43 max | 14 mm | Gewindetiefe |
| t87 max | 12 mm |
Abmessungen
| B2 | 75 mm | Width of Support Rail |
| B4 | 74 mm | Width of Return Unit |
| B72 | 2 mm | |
| H1 | 32 mm | |
| H2 | 66,5 mm | Height |
| H4 | 81,5 mm | Height of Return Unit |
| H7 | 47 mm | |
| h13 | 25 mm | |
| L2 max | 8.000 mm | Maximum length of Support Rail |
| L4 | 80 mm | |
| Lx1 min | 50 mm | Minimum distance between the Carriages |
| FBL | 1,44 | Effective length factor of bellow |
| S | 85 mm | Dimension |
Technische Daten
| mLAW | 0,73 kg | Mass of Carriage |
| m3 | 0,73 kg | Mass of additional Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Max. Beschleunigung |
| Rx | 60 mm | |
| Ry | 20,5 mm | |
| Rz | 54 mm | |
| I C | 4.100 N | Load direction I: compressive load |
| I C0 | 2.400 N | Load direction I: compressive load |
| II C | 4.100 N | Load direction II: tensile load |
| II C0 | 2.400 N | Load direction II: tensile load |
| III C | 6.600 N | Load direction III: lateral load |
| III C0 | 4.200 N | Load direction III: lateral load |
| M0x per | 30 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 130 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 70 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 104 cm4 | Geometrical moments of inertia of Support Rail 2 |
| Iz | 76 cm4 | Geometrical moments of inertia of Support Rail 2 |
Zusätzliche Informationen
18 Nm | Max. permissible drive torque | |
4 x LFR50/8-6-2Z | Track Rollers | |
0,1 mm | Repeat Accurancy ± | |
175 mm | Feed (mm/rotation) | |
20AT5 | Toothed Belt | |
0,068 kg/m | Mass of Toothed Belt | |
640 N | Permissible Toothed Belt operating force | |
2,2 kg*cm2 | Mass moment of inertia of Gears |
Temperaturbereich
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
Fußnoten
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Moment of inertia of area of “closed” support rail (= support rail without free milled area on base). In comparison with these values, the moment of inertia of area Iy of the side with the free milled area on the base is reduced to an insignificant degree and the moment of inertia of area Iz is reduced by approx. 10%.
Downloads:
Ihre aktuelle Produktvariante
| Grössenkennziffer | 32 | |
| Laufwagenlänge | 155 | 155 mm |
| Wagenausführung | / | Standardwagen |
| Antrieb | (3)ZR | Zahnriemenantrieb |
| Zusätzlicher Laufwagen | W2 | Zweiter, angetriebener Laufwagen |
| Tragschienenausführung | / | Einteilig |
| Faltenbalg | FBALG | Ja |
Zuletzt angesehene Produkte
